585,733 active members*
4,968 visitors online*
Register for free
Login

Thread: TH error for yasnac CNC milling machine

Results 1 to 4 of 4
  1. 09-12-2015, 08:47 AM #1
    a_rezaei
    a_rezaei is offline Registered
    Join Date
    Sep 2015
    Posts
    2

    TH error for yasnac CNC milling machine

    Hi everyone,
    I have a Matsuura milling machine with MX3 Yasnac controller, but recently the machining is interrupted by "TH error code 010" and the machine stops working. Does anyone know what should I do?
    Thanks
    Reply With Quote Reply With Quote
  2. 09-23-2015, 11:59 AM #2
    ncbobbys
    ncbobbys is offline Registered
    Join Date
    Jan 2015
    Posts
    42

    Re: TH error for yasnac CNC milling machine

    Are you "Drip Feeding" your program from computer or is it in the Yasnac memory?
    Contact Bob @ [email protected]
    Reply With Quote Reply With Quote
  3. 09-23-2015, 04:03 PM #3
    a_rezaei
    a_rezaei is offline Registered
    Join Date
    Sep 2015
    Posts
    2

    Re: TH error for yasnac CNC milling machine

    Quote Originally Posted by ncbobbys View Post
    Are you "Drip Feeding" your program from computer or is it in the Yasnac memory?
    Contact Bob @ [email protected]
    Thanks for reply. what do mean by "Drip Feeding"? It happens randomly in sending program via a computer (DNC session).
    Reply With Quote Reply With Quote
  4. 09-23-2015, 04:12 PM #4
    ncbobbys
    ncbobbys is offline Registered
    Join Date
    Jan 2015
    Posts
    42

    Re: TH error for yasnac CNC milling machine

    Quote Originally Posted by a_rezaei View Post
    Thanks for reply. what do mean by "Drip Feeding"? It happens randomly in sending program via a computer (DNC session).
    What I meant is ... are you running program off your computer? Or are you uploading the program to put into controls memory and then you get the error?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Yasnac LX3 alarm 400 SEQUENCE ERROR (2)
    By Delw in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 03-18-2017, 11:30 PM
  2. Yasnac LX-3 322: CMOS Vacant Area Error
    By fignoggle in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 07-07-2011, 08:55 PM
  3. Hitachi Seiki with Yasnac LX-3 Error
    By dannyboysd89 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 7
    Last Post: 08-08-2006, 01:54 PM
  4. Yasnac i80 error 102
    By Boring Life in forum Fanuc
    Replies: 14
    Last Post: 04-09-2006, 12:05 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules