584,812 active members*
5,349 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Mori Seiki Machines > Mori Seiki Mills > Mori Seiki nh5000 stops after pallet B does a 180 degree rotation - without alarm
Results 1 to 6 of 6
  1. #1
    Join Date
    Sep 2015
    Posts
    1

    Mori Seiki nh5000 stops after pallet B does a 180 degree rotation - without alarm

    Hey,

    In before thanks to anyone who puts his time in this.

    I have a kinda weird problem. On Mori Seiki nh5000.Mid work mori just stopped working after pallet B did a 180 degree rotation.Working time goes on but nothing moves ( no alarms).
    If i block pallet B(with program that does nothing) and just work with pallet A everythingˇs fine.I checked program and everything its like it was before (when it was still fine).
    Checked all the sensors under the table, clamp, unclamp, arm down, arm up (both pallets are using the same sensors) and it looks ok.
    Pallet sits fine and in mdi mode i manage to run it thru the whole cyclus just fine.The problem starts in automatic mode when pallet B does a 180 degree rotation.

    Thanks in advance.

  2. #2

    Re: Mori Seiki nh5000 stops after pallet B does a 180 degree rotation - without alarm

    I am going on a limb here and say you have a Fanuc CNC on this machine. Check SYSTEM Diagnostic and see if any of the bits are set to 1 when you are in this state.

  3. #3
    Join Date
    Feb 2009
    Posts
    6028

    Re: Mori Seiki nh5000 stops after pallet B does a 180 degree rotation - without alarm

    If it works in MDI, there is something in your program causing it.

    Sent from my A3-A20FHD using Tapatalk

  4. #4
    Join Date
    Sep 2015
    Posts
    16

    Re: Mori Seiki nh5000 stops after pallet B does a 180 degree rotation - without alarm

    You should be able to contact DMG MORI directly. They have some great techs available for phone service. They are now direct. You can get the number from the website DMG MORI USA ? Machine Tools, CNC Milling Machines, Lathes and Turning Centers

  5. #5
    Join Date
    Dec 2018
    Posts
    4
    Unsure if you found the problem or not but my machine is doing the exact same thing as of today. Was on the phone with mori and they seem to think that something is worn towards the zero point.

  6. #6
    Join Date
    Jul 2019
    Posts
    2

    Re: Mori Seiki nh5000 stops after pallet B does a 180 degree rotation - without alarm

    try to use the rotation with feed 2000 , M10 G01 B? F2000 M11 .
    PERHAPS THE PALLET IS TOO HEAVY

Similar Threads

  1. Coordinate rotation problem on MORI SEIKI TV40 MSC-802m
    By kpandy in forum MetalWork Discussion
    Replies: 2
    Last Post: 08-28-2014, 04:25 PM
  2. Mori Seiki SH-40 Pallet changing speed
    By Tafc7306 in forum Mori Seiki Mills
    Replies: 1
    Last Post: 07-05-2014, 10:39 PM
  3. Replies: 3
    Last Post: 11-01-2013, 04:44 PM
  4. 911 RAM Parity Alarm on MORI-SEIKI SL-25
    By Nu2CNCglenn in forum Community Club House
    Replies: 0
    Last Post: 10-22-2013, 05:50 PM
  5. MORI SEIKI CL-20 ALARM!!!
    By GMI in forum Mori Seiki lathes
    Replies: 4
    Last Post: 07-26-2011, 04:46 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •