Hello!
Does anyone have a postprocessor for Edgecam - mach3 that is 5 axis?
Thanks, Robert
Hello!
Does anyone have a postprocessor for Edgecam - mach3 that is 5 axis?
Thanks, Robert
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
Hello,
What set up are you using? I have compiled a specific post that I use for a B/C mini trunnion from Doughty Drive on my shark router. It took me a while to get it to do what I needed! But works for what I'm trying to do! Still tweaking it here n there. I'm using it as a 3+2 type for general positional indexing.
PM me if interested.
LJP
Thanks! but the edgecam sites inside he`s site ( Jeffcnc.....) is not working, and i tried to send him an email but the email doesn`t work...
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
Robert,
This is the .cgd file from the post that I have made for my 5-axis machine. Start by taking a look n see if something can work for you? My machine is setup with "Y" gantry and "X" & "Z" attached to that. The "B" & "C" are setup as "Table / Table" motion.
As always be careful with any new post on your machine!
Let me know if you need some help.
Larry
Thanks!
You don`t have it for metric?
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html
Your welcome.
No, I do not have it in metric.
Maybe someday… ?
Some day you will! but i need to test it first, and i need to build an 5 axis
My second homebuilt cnc machine cnczone.com/forums/norwegian_club_house/123977-ombygget_cnc_-_gecko_540_a.html