[snaasbo]

Hi, I am new to Gibbscam and compost3. I have a post processor to a okuma genos machine I want to edit. I have a macro that I want to add to the source code that sets the machine´s zero point. Does anyone have any Idea how to do that?

Thanks in advance!

[ajesms]

Yes


Enviado desde mi iPhone utilizando Tapatalk

[snaasbo]

Yes


Enviado desde mi iPhone utilizando Tapatalk

How can I do that?

[ajesms]

Send me email with code sample that you need.


Enviado desde mi iPhone utilizando Tapatalk

[snaasbo]

Send me email with code sample that you need.


Enviado desde mi iPhone utilizando Tapatalk

I want the post processor to have a standard output in G code. The standard out put is this:

( ------NULLPUNKT------ )
N000 EMNE=100.0 BAKE=53.0
N000 CALL ONUL

Where ONUL is a macro the machine will call.


How can I modify the source code so it will write out this at the top of the G - code?

[ajesms]

I send it to you by email


Enviado desde mi iPhone utilizando Tapatalk

[snaasbo]

I send it to you by email


Enviado desde mi iPhone utilizando Tapatalk

\]

Thank you

my email is [email protected]

[snaasbo]

I send it to you by email


Enviado desde mi iPhone utilizando Tapatalk

How are you doing?

[peca409]

Hi has enyone comPost3

[MACHINEFREAK]

PM me I have

[mario1jose121]

someone could give me the compost 3

[email protected]

[MOOKKSS]

Hello,

Anybody can send me Compost3?

Thanks

[George123456]

I also could use Compost3? I'm so tired of editing to make it look like this.

N58T2M6( .750 R-EM - LOC 2.6 - OOH 2.700)

Ill trade software if anyone can do it.

[email protected]

[George123456]

My email [email protected]

I need help! I'm sick and tired of editing every posted program. Right now it is posting like this:

N16T1M6
N17( OPERATION 1: CONTOUR )
N18( ----------SHELL MILL )
N19( TOOL 1: 3. SHELL ENDMILL )
N20( / SHELL-MILL 3.00 DIA ) <------------- This is what I typed in comment line.
N21( CS#1 - XY PLANE )



------I WANT THIS --------
N16T1M6( / SHELL-MILL 3.00 DIA )<-------------------- Tool comment on tool call line.

Please help this old man, please


%
N1O1(GC-GIBBSCAM 2016 12-12-23.NCF )
N2( (
(
( ALUM
( X8.700
( Y8.700
( 2.500 THICK
(
( X0/Y0 CENTER OF PART
( -Z0- IS TOP OF PART AFTER SHELL-MILL CLEANS UP 100%
( DEEPEST CUT AROUND OD IS Z-1.800
( HOLD IN VISE WITH 1.800 MIN CLEARANCE AROUND O.D.
(
( )
N3( FORMAT: GC #1B GOOD TOOL LIST-GOOD G53 G41-KINGTEK FADAL FORMAT 2 [PMW] C1752.20.11.PST )
N4( 1/27/2024 AT 9:05 PM )
N5( OUTPUT IN ABSOLUTE INCHES )
N6( PARTS PROGRAMMED: 1 )
N7( FIRST TOOL NOT IN SPINDLE )
N8( TOOL 1: 3. SHELL ENDMILL / SHELL-MILL 3.00 DIA )
N9( TOOL 2: .75 ROUGH ENDMILL / .750 R-EM - LOC 2.6 - OOH 2.700 )
N10( TOOL 3: .75 ROUGH ENDMILL / .750 R-EM - LOC 1.00 - OOH 1.100 )
N11( TOOL 4: .5 ROUGH ENDMILL / .500 R-EM - LOC 1.00 - OOH 1.100 )
N12( TOOL 5: .5 SPOT DRILL / .500 NC SPOT DRILL - LOC .500 - OOH1.00 )
N13( TOOL 6: .201 DRILL / #7 JOBBER DRILL .201 DIA. )
N14( TOOL 7: .25 TAP / 1/4-20 TAP IN COMPRESSION TAP HOLDER )
N15G20
N16T1M6
N17( OPERATION 1: CONTOUR )
N18( ----------SHELL MILL )
N19( TOOL 1: 3. SHELL ENDMILL )
N20( / SHELL-MILL 3.00 DIA ) <--------------------------- THIS LINE TO N16 LINE
N21( CS#1 - XY PLANE )
N22E1
N23S2500M3