How to modify mc9 post (just tool change)

How to modify mpfan (generic Fanuc mill post) so do not post tool numbers and tool change any more.
Thanks


Sample program used and post output I need.
It is for older type of boring mill without tool changer

(21/32 DRILL )
(DRILL 3/4-10 TAPED HOLES 4 PLC)
N368 G54 G17 G21 G69 G90
N370 G91 G30 W0
N372 G90 S350 M3
N374 G0 X-401.32 Y-381.
N376 G0 G30 Z0
N378 G43 H4 W100. M08
N380 G98 G83 W-34.408 Q2. R2.5 F76.200
N382 X-401.32 Y381.
N384 X401.32 Y381.
N386 X401.32 Y-381.
N388 G80 W100.
N390 M05
N392 G0 Z0 M09
N394 G49 G30 W0
N396 G91 G30 X0 Y0
N398 G90 M06 ------ m06 executes stop and orient spindle
N400 M30 ------ tool change done by operator