584,842 active members*
4,491 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hardinge Lathes > Hardinge Conquest T-51 Lube System Failure
Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2012
    Posts
    3

    Hardinge Conquest T-51 Lube System Failure

    I've been working towards getting this lathe up and running in our shop for the last few days and so far everything has gone well, but now I'm really stuck. It turns out a previous employee decided to take it upon himself to disassemble the lube system in an effort to diagnose and fix the "Lube System Failure" error. This puts me in a bad situation because now I have no idea how the lube system was originally wired. Would anybody that has this machine or a similar model hardinge with the bijur oil system be able to take a picture of the terminal block inside the auto oiler housing? This would at least give me a solid base line to begin troubleshooting the problem.

    Thanks in advance,

    Cameron

    Sent from my SM-N900V using Tapatalk

  2. #2

    Re: Hardinge Conquest T-51 Lube System Failure

    Hi, I have a Hardinge Conquest T51 with fanuc 18T. I don't have its maintenance manual.My machine getting alarm 1020 Chuck open. Can you please help me in this regard as you have same machine running. Thanks

  3. #3

    Re: Hardinge Conquest T-51 Lube System Failure

    Cameron, I will send you wiring picture tomorrow morning for sure.

  4. #4
    Join Date
    Aug 2011
    Posts
    34

    Re: Hardinge Conquest T-51 Lube System Failure

    Usually you get the "chuck open" message when you try to cycle start the machine with the chuck open, which you can't do.

  5. #5
    Join Date
    May 2016
    Posts
    526

    Re: Hardinge Conquest T-51 Lube System Failure

    Probably got the machine set for internal or the hoses round the wrong way
    Manuals available if required

Similar Threads

  1. Replies: 3
    Last Post: 03-14-2019, 03:24 PM
  2. hardinge conquest 51
    By mikemck in forum Hardinge Lathes
    Replies: 2
    Last Post: 11-16-2015, 02:33 PM
  3. Hardinge conquest 42
    By gyroxis in forum Hardinge Lathes
    Replies: 1
    Last Post: 09-21-2010, 02:07 AM
  4. Hardinge Conquest 42
    By newc in forum Hardinge Lathes
    Replies: 1
    Last Post: 02-25-2010, 01:10 PM
  5. Hardinge Conquest 42
    By cncdiag in forum Fanuc
    Replies: 1
    Last Post: 05-21-2008, 01:06 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •