584,860 active members*
4,998 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking > Welding Brazing Soldering Sealing > Welding Beryllium copper pinch plates
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2008
    Posts
    138

    Welding Beryllium copper pinch plates

    I have a question for my Tig'ers. We repair molds at my shop. And have to weld up Beryllium copper pinch. I understand how toxic this stuff is, and we are well ventilated here. My question is, what method and set up would you use to get a fine bead on top of the pinch. In most cases, the pinch is only low by maybe .002. and we have to weld the top, then machine it back to a proud state. We have been doing it for years, but its sometimes hit or miss. My feeling is there is too much heat being widely displaced. I would like to direct the heat too a finer area. I have attached some pics of our set up, and an example of with pinch.

  2. #2
    Join Date
    Feb 2011
    Posts
    423

    Re: Welding Beryllium copper pinch plates

    My dad was victim of Beryllium exposure resulting from casting injection molds and plunger tips during the 1960's. Yes it was the fumes from melting the alloy. If your employer is not requiring you to shower at the end of the day before leaving the premises you are taking this sh_t home with you. If they are not requiring yearly lung x-rays and blood tests I would think about another place of employment.I am not trying to downplay your job or your employer. I have the utmost respect for welders and know firsthand that its not an easy way to make a living. Its just that there are several more avenues of protection required when working with this material. My family and I are witnesses to the slow horrible death caused by it. One example is we asked his pulmonoligist if the 100 lbs he had lost was caused by the disease. We were told yes but indirectly, his labored breathing required around 10,000 calories daily just to stay alive. Dont take this personal as its not meant that way at all. Just something to think about.

  3. #3
    Join Date
    Jul 2018
    Posts
    6254

    Re: Welding Beryllium copper pinch plates

    The Miller 250 was great machine, I've used them alot. I'd get a new inverter type machine and you will find it holds a finer bead. Plus I'd make sure I had positive ventilation head gear and various filters before I melted metal. There will be recommended ventilation strategies for the stuff. Peter

  4. #4
    Join Date
    Jan 2005
    Posts
    15362

    Re: Welding Beryllium copper pinch plates

    Quote Originally Posted by dfearnow View Post
    I have a question for my Tig'ers. We repair molds at my shop. And have to weld up Beryllium copper pinch. I understand how toxic this stuff is, and we are well ventilated here. My question is, what method and set up would you use to get a fine bead on top of the pinch. In most cases, the pinch is only low by maybe .002. and we have to weld the top, then machine it back to a proud state. We have been doing it for years, but its sometimes hit or miss. My feeling is there is too much heat being widely displaced. I would like to direct the heat too a finer area. I have attached some pics of our set up, and an example of with pinch.
    Time for you to invest in a laser welder for this type of work you have much better control less machining and the weld process does not become as toxic Tig is old hat for mold repair of any kind
    Here is a video of one of the many lasers doing mold repair any material can be welded, no stress no distortion

    https://www.youtube.com/watch?v=9xPHUQtLbyU
    Mactec54

Similar Threads

  1. beryllium copper
    By trangt143 in forum Haas Mills
    Replies: 16
    Last Post: 09-23-2019, 03:11 PM
  2. Beryllium copper
    By MAIDENIRON in forum Community Club House
    Replies: 6
    Last Post: 07-28-2013, 03:30 AM
  3. Turning Beryllium Copper--Safe enough?
    By themuffinman in forum Composites, Exotic Metals etc
    Replies: 6
    Last Post: 11-14-2010, 01:21 AM
  4. Machining beryllium copper
    By ouldeeps in forum MetalWork Discussion
    Replies: 6
    Last Post: 11-01-2008, 03:02 AM
  5. * Polygon Milling beryllium copper cnc swiss lathe
    By TMW Mag in forum CNC Swiss Screw Machines
    Replies: 0
    Last Post: 09-26-2008, 12:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •