I posted this in the Fadal forum but thought it might get a bite here as well.




Well the hard disk and mother board of my 32 MP have been replaced but I'm still having problems. I can't seem to get the CNC side to communicate with the windows side. I CAN get a good loop back test with the RS 232 but the 422 is not working.

I get a "baud rate detection failed" message when I try to go disk to memory from the CNC side. When I run through the memory manager on the windows side and go to utilities, run the diagnostics on the comm port I get an error also.

I've replaced the 422 serial cable, no help.

This maybe a software problem, things not configured right but I have no instructions (the manuals provided at the FADAL site don't cover the 32MP).

Any one who knows 32MP controllers is welcome to contact me.

[email protected] maybe we could get in touch by phone and you can walk me through troubleshooting this. I'll gladly pay for the phone call.

I called Fadal service, one guy told me the com1 port was one place, the next tech I talked to tells me oh that guy was wrong and the COM port is in a different location....they really are not much help with a problem like this.