504,012 active members
4,254 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Uncategorised MetalWorking Machines > MAZAK T32-2 Control panel suddenly died
Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Jan 2013
    Posts
    46

    MAZAK T32-2 Control panel suddenly died

    Hy did you solve the problem?
    I suddenly lost the power on the control panel, I checked the fuse on the power supply behind the control panel and the fuse was blown. I replaced the fuse but I am not getting any voltage on output pins.
    There is a 6 PIN output with wires.
    RED/WHITE/BLUE/RED/WHITE/not connected.

    The PSU should output +5V(3A)/+12(0.4A)/-12V(0.4A) but Im not sure which voltage goes on which pins.
    I was thinking to use PC PSU instead but I need to know which voltage goes on which pin.
    If anyone could help that would be awesome.

  2. #2
    Junior Member
    Join Date
    Jan 2013
    Posts
    46

    Re: MAZAK T32-2 Control panel suddenly died

    If anyone can check with multimeter output voltages on the CNP82 connector that would be great.
    I tryed to trace the leads and came up with output but Im not sure if its right.

    Click image for larger version. 

Name:	20190904_190439.jpg 
Views:	0 
Size:	84.0 KB 
ID:	426706

  3. #3

    Join Date
    Aug 2019
    Posts
    168

    Re: MAZAK T32-2 Control panel suddenly died

    Quote Originally Posted by mlinkadelsol View Post
    If anyone can check with multimeter output voltages on the CNP82 connector that would be great.
    I tryed to trace the leads and came up with output but Im not sure if its right.

    Click image for larger version. 

Name:	20190904_190439.jpg 
Views:	0 
Size:	84.0 KB 
ID:	426706
    In a meantime drag your question over to Practical Machinist . com. Lots of folks there would still have the Maintenance Manual and could snap a few pics of those schematics for you.

  4. #4
    Junior Member
    Join Date
    Jan 2013
    Posts
    46
    Quote Originally Posted by Mecanix View Post
    In a meantime drag your question over to Practical Machinist . com. Lots of folks there would still have the Maintenance Manual and could snap a few pics of those schematics for you.
    I did post on both forums.
    Thank you.

Similar Threads

  1. Need help on mazak V-550 mill with m32 control panel.
    By Spangler1 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 5
    Last Post: 07-12-2018, 08:13 PM
  2. SXCNC Control Box Died. Any ideas?
    By mick3043 in forum Machinist Hangout
    Replies: 0
    Last Post: 05-05-2017, 02:19 AM
  3. Mazak M5N with T32-2 Controller battery died
    By MONKEY2TO2 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 06-19-2014, 11:21 PM
  4. FH6800
    By jimica in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 06-15-2013, 10:49 AM
  5. Died Control
    By akram in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 03-07-2008, 10:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •