Dear forum members,
I am looking for 3 brushless servo motors (used or new surplus) for my desktop CNC milling machine retrofit project. Required servo motors should have feedback encoders. Specs I am looking for are:
Rated power: 400 – 500 W
Rated torque: 2.0 – 2.5 NM
Rated current: 2.5 A
Peak Current: 7.5 A
Rated speed: 1500 – 2500 RPM
Thank you in advance.
Karen P.
For offers please contact me to: [email protected]
Results 1 to 4 of 4
-
12-06-2006, 11:27 PM #1
Registered
- Join Date
- Dec 2004
- Posts
- 2
Need servo motors for desktop CNC milling machine
-
12-19-2006, 10:12 AM #2
Registered
- Join Date
- Nov 2005
- Posts
- 105
I have these Japan made: DX050 by Shinana Kenshi
Want to do some research and see if they work for u ? ill let you have them for $10 each :PLive life like you never see another day
-
12-19-2006, 10:14 AM #3
Registered
- Join Date
- Nov 2005
- Posts
- 105
Shinano Kenshi
*typoLive life like you never see another day
-
12-19-2006, 01:01 PM #4
Registered
- Join Date
- Dec 2004
- Posts
- 2
Thank you for your massage.
I have looked at Shinano Kenshi Co. website <www.shinano.com> catalogue. After product line examination I came to a conclusion that company does not producing servo motors matching to my drives. Unfortunately I could not find servo motor by model DX050. At any case thank you for reply.
Reply With Quote
Posting Permissions
