584,841 active members*
4,312 visitors online*
Register for free
Login
Page 1 of 3 123
Results 1 to 20 of 41
  1. #1
    Join Date
    Mar 2003
    Posts
    6855

    bad laser tube

    Here is a bad laser tube


    http://cnczone.com/downloads/laser.wmv

  2. #2
    Join Date
    Mar 2006
    Posts
    759
    says the video is no longer available?
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

    "If the women don't find you handsome, they should at least find you handy"
    -RedGreen show.

  3. #3
    Join Date
    May 2005
    Posts
    1810
    Nice! I mean the video, not the tube....

    Scott
    Consistency is a good thing....unless you're consistently an idiot.

  4. #4
    Join Date
    Oct 2006
    Posts
    3
    ouch that hurts
    is it yours?

  5. #5
    Join Date
    Oct 2005
    Posts
    96
    Hi Paul G,

    Just wondering, how many hours did you run this tube until this condition?

    Does it always run at full power and is the power supply is a match set with the tube?

    Thanks

  6. #6
    Join Date
    Mar 2003
    Posts
    6855
    That started from the first firing, I have have another tube like this, I'm waiting to see if they will replace it.

  7. #7
    Join Date
    Oct 2005
    Posts
    96
    What brand / model is the tube?
    I would aviod the model if i were to purchase one.

    I have doubt if they did a test before they send it out for sales or have any quality control on this model.

    Thanks

  8. #8
    Join Date
    Mar 2003
    Posts
    6855
    I can't say yet, I want to wait to see what they say, the other tube that I have did the samething and they would not replace it, I have one more tube from them that has not been fired yet, so I'm hoping that one will not have a problem.

  9. #9
    Join Date
    Jan 2005
    Posts
    1880
    video is corrupted or something I get pasty colors
    thanks
    Michael T.
    "If you don't stand for something, chances are, you'll fall for anything!"

  10. #10
    Join Date
    Mar 2003
    Posts
    6855
    Just checked the video and working perfect here.

  11. #11
    Join Date
    Aug 2004
    Posts
    2849
    I believe all the tube info is on this site....back from when you first started the project.....

  12. #12
    Join Date
    Oct 2005
    Posts
    96
    Thanks Vipertx, found Paul G's source for the tube.

    Found that he had receive one tube on march 05.

    One year plus is okay if he use it for more than 1000hours otherwise it is pretty expensive.

  13. #13
    Join Date
    Apr 2005
    Posts
    252
    uses may time?
    I hoped demonstrates my cnc,laser and model
    www.modelcn.cn

  14. #14
    Join Date
    Mar 2003
    Posts
    6855
    Steve luo is where I got my tubes from and they DO NOT STAND BY THERE TUBES, they will not replace the 3 defective tubes they sold me. So buyer beware.

  15. #15
    Join Date
    Apr 2005
    Posts
    252
    that is eliminated products.
    I hoped demonstrates my cnc,laser and model
    www.modelcn.cn

  16. #16
    Join Date
    Mar 2003
    Posts
    6855
    uh?

  17. #17
    Join Date
    Apr 2005
    Posts
    252
    Go to look for the person who sells him, change a new one.
    I hoped demonstrates my cnc,laser and model
    www.modelcn.cn

  18. #18
    Join Date
    Mar 2003
    Posts
    6855
    I'm looking for a new supplier, need 50 or 60watt tubes

  19. #19
    Join Date
    Apr 2005
    Posts
    252
    60w is 1250mm
    I hoped demonstrates my cnc,laser and model
    www.modelcn.cn

  20. #20
    Join Date
    Mar 2003
    Posts
    6855
    OK and your price is?

Page 1 of 3 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •