584,805 active members*
4,987 visitors online*
Register for free
Login
IndustryArena Forum > Hobby Projects > Wooden Clocks > G-code plans for a cnc router
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2015
    Posts
    9

    G-code plans for a cnc router

    Hello Everyone,
    If you want to build a rocking horse you go on line and purchase the plans trace them out and cut them on your bandsaw, drill them in your drill press, sand them with your sander and put it together.
    My question is can you purchase plan with G-code for a CNC Router for example a hope chest, cabinet doors, clocks, etc?
    Thank you,
    Philip

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: G-code plans for a cnc router

    You may be able to find some, but it's not common.
    The reason is that not all g-code is universal, and ideally, it should be tailored to your specific machine.
    Some controls may not support certain g-codes, and feedrates will tend to be different from machine to machine.
    Personally, I would never run g-code on my machine that was created by someone else.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. Does anyone have plans for this CNC Router
    By 94vette in forum DIY CNC Router Table Machines
    Replies: 5
    Last Post: 08-13-2010, 12:48 AM
  2. Looking for plans I used for CNC Router
    By Kraig1 in forum Open Source CNC Machine Designs
    Replies: 1
    Last Post: 09-07-2009, 06:03 PM
  3. G-Code Router Plans ?
    By deleteallusers in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 05-04-2007, 07:47 PM
  4. Plans for a CNC Router
    By DAB516 in forum DIY CNC Router Table Machines
    Replies: 22
    Last Post: 03-30-2007, 08:00 PM
  5. My CNC Router Plans
    By Clyde in forum DIY CNC Router Table Machines
    Replies: 11
    Last Post: 04-18-2004, 04:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •