Well, I tried to take apart this old dirty Yaskawa servo and that included removing the encoder. Mistake! The encoder hub wouldnt come off- lok-tite. So I gently heated the shaft with a tiny pencil torch. This happened:
Attachment 296252
Attachment 296254
Attachment 296256
It was some type of easily meltable plastic. So can I get a replacement disk? Or am I stuck putting another encoder on there?
Im so sorry...
Results 1 to 3 of 3
-
10-30-2015, 12:15 AM #1
Registered
- Join Date
- Sep 2011
- Posts
- 474
Yaskawa DC Minertia Servo encoder....And im an idiot.
-
10-30-2015, 12:27 AM #2
Registered
- Join Date
- Apr 2004
- Posts
- 733
Re: Yaskawa DC Minertia Servo encoder....And im an idiot.
Usdigital sells replacement encoder disks. You can contact them to see if compatible. If not, complete encoders with disks are around $50
-
10-30-2015, 01:58 AM #3
Gold Member
- Join Date
- Sep 2010
- Posts
- 1765
Re: Yaskawa DC Minertia Servo encoder....And im an idiot.
Btw, if that pancake motor is like pmi ones, taking motor apart will demag it and ruin it. Not sure if like its competitor or not. Just a thought.
Reply With QuoteSimilar Threads
-
Yaskawa Minertia Dc servos
By PCP in forum CNC Machine Related ElectronicsReplies: 0Last Post: 08-18-2014, 04:04 PM -
Driver yaskawa servo sanyo denki encoder output phase error
By imasdpic in forum Servo Motors / DrivesReplies: 3Last Post: 02-19-2014, 08:49 PM -
Yaskawa ac servo encoder problem
By Grubma in forum Servo Motors / DrivesReplies: 2Last Post: 08-16-2009, 06:24 AM -
Yaskawa Minertia motor connections
By belli in forum Servo Motors / DrivesReplies: 7Last Post: 01-29-2007, 05:35 AM -
Yaskawa Encoder-DC Servo Motor trouble
By nlh in forum Servo Motors / DrivesReplies: 2Last Post: 11-28-2006, 03:58 PM
Tags for this Thread
Posting Permissions
