584,829 active members*
5,070 visitors online*
Register for free
Login
Page 9 of 9 789
Results 161 to 168 of 168
  1. #161
    Join Date
    Oct 2005
    Posts
    267
    Quote Originally Posted by Buzz9075 View Post
    Mine is collecting dust because of all the issues I had with it :0 as well as 10K was to slow for some work, and the noise levels are much lower without in on. Thinking about selling it and the adaptors.
    What kind of router are you running? What all do you have and how much?

  2. #162
    Join Date
    Dec 2006
    Posts
    457
    Not sure what I want.... I have many adaptors, the drill bit adaptor with head. I will gather all the information in tonight and post. Here is a list of the issues I have had (with the stronger spring).
    Dust collects between the head and the adaptors, making if very hard to remove the adaptor till you get the dust out.
    Even at 10K to 12K (as many have proved you can run), the adaptors will spin in the head unit when a high strees zone is hit (really obvious in oak with the grain gets tight). This cause a side effect of removing the finish of the cutters.
    For some reason I can not longer get the V cutters to spin true when using it true
    Noise level from the router is much higher with the attachment in versus out. My house is much quiter running the router without it in.

  3. #163
    Join Date
    Jun 2007
    Posts
    1
    Greetings.
    I have been following the thread about the tool changer in silence.
    I am planning to build a CNC mill and would love to have a tool changer.
    Can I also get a copy of the plans, please?
    fruktodlaren(a)gmail.com
    Best regards
    /Tony from Sweden

  4. #164
    Join Date
    Dec 2006
    Posts
    457
    I have uploaded the information on the tool changer I am going to sell on my web page... once the information is gone the unit is sold... www.cncmachine.phillipsfamily.ca

  5. #165
    Join Date
    May 2014
    Posts
    3

    Re: Two more of Joe's CNC Model 2006

    good job
    Where can I buy this rapid changer tool?

  6. #166
    Join Date
    May 2014
    Posts
    3

    Re: Two more of Joe's CNC Model 2006

    where can i buy this rapid changer tool?

  7. #167
    Join Date
    Jan 2019
    Posts
    1

    Re: Two more of Joe's CNC Model 2006

    hi is there an update about the tool changer

  8. #168
    Join Date
    May 2005
    Posts
    8

    Re: Two more of Joe's CNC Model 2006

    HiTech systems no longer make the adaptor the changer used so you would need to find another system.

Page 9 of 9 789

Similar Threads

  1. Joe's CNC Model 2006
    By joecnc2006 in forum Joes CNC Model 2006
    Replies: 1749
    Last Post: 11-08-2022, 09:37 AM
  2. [AU] Joe's 2006 Model
    By nat.andrews in forum Joes CNC Model 2006
    Replies: 2
    Last Post: 11-11-2013, 11:50 AM
  3. Electronics for a Model 2006
    By joegtp in forum Joes CNC Model 2006
    Replies: 4
    Last Post: 08-31-2011, 04:43 PM
  4. New to Joe model 2006
    By Darroll in forum Joes CNC Model 2006
    Replies: 3
    Last Post: 01-16-2008, 11:31 PM
  5. JOES cnc MODEL 2006 R-1 or R-2???
    By Khalid in forum Joes CNC Model 2006
    Replies: 6
    Last Post: 11-11-2007, 06:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •