hello, I have bought some matching 200w Panasonic minas a4 motors and drives

I wanted to use a 24v mach3 e-cut card, but I can't seem to find one.

I suppose I wanted to keep the limits and spindle control et all 24v

leave the step and direction 5v/usb optoisolated

seeing as I can't get a 24v e-cut, what are my alternatives?

p.s. I have not a clue as to how to wire the drives and motors, I have the tails as pictured, for starters, does each drive want its own fused iec chassis plug, with two ferrite rings on the + and -, one on the earth

any one using these smaller motors cnc