[manolo74]

Hi everybody, I'm new here, done alot of reading and there is alot of information on this great site.
I am going to start to build a cnc roting table and was wondering if anybody could help with some added info. The table I am lookig to build is an operating 4' x 8' table, my first question is to as which motor should I use stepper or servo? and second should it be direct drive or belt driven?
Any input would be greatly appreciated, thanks in advance.

[manolo74]

I'm figuring that from what I've been reading that the servo motors are better. How can I know what size I will need?

[ViperTX]

Cutting wood? You could use servos or steppers....you can't go wrong with anything about 700 oz-in torque.....generally with servos you step or down....depending on your needs.

Steppers, I would direct drive.

[manolo74]

Cutting wood? You could use servos or steppers....you can't go wrong with anything about 700 oz-in torque.....generally with servos you step or down....depending on your needs.

Steppers, I would direct drive.

Mostly for wood, with a 2 3/4 hp router. What do you mean, when you say "generally with servos you step or down"?