[Wooden_Pepe]

Hi all,

i am newbee in laser cut. I need laser cut for cutting and engraving wood components from max 10mm thick plywood.
I get offer to 80W Epilog laser. Epilog offer perfect quality, support and quality output, but price is too high for me.

There is some good option in Chinese lasers cutters?


Thank you.
Pepe

[Gozzie]

There are some great alternatives especially for laser cutting.
The western machines are known for exceptional engraving.
For cutting the Chinese machines do a wonderful job
Talk to Nolan at Thunder laser for power recommendations.
I would guess around 100 watts would be enough. I have 130 watts and 10mm cuts good (solid wood). I don't cut plywood
so someone else would have to chime in on that. Just remember when looking at power ratings on a glass tube that
you cant run it at 100% power. You need to stay around 80 - 90% under that rating for good tube life.
That means a 100 watt tube should be run around 80 watts max.

Gozzie

[cinematic2]

Hi
Where you from?
Regards

[wklaserliu]

Hi all,

i am newbee in laser cut. I need laser cut for cutting and engraving wood components from max 10mm thick plywood.
I get offer to 80W Epilog laser. Epilog offer perfect quality, support and quality output, but price is too high for me.

There is some good option in Chinese lasers cutters?


Thank you.
Pepe

HI Pepe,

dear for cutting 10mm thick plywood, ,better use 130w , 100w also ok but speed is slow.
your wood size is how much ?
we have LC1325(1300*2500mm) ,LC6090(600*900mm) etc,
many modles, you can go to web for news: www.wklaser.com

for more news you can contact me:
[email protected]
skype:wkquiven

[Wooden_Pepe]

Hi,
Czech Rep.