585,712 active members*
4,151 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc A06B spindle drive pinout deffinition for CN1 cable

Thread: Fanuc A06B spindle drive pinout deffinition for CN1 cable

Results 1 to 3 of 3
  1. 12-10-2015, 04:03 PM #1
    Scott Pancheau
    Scott Pancheau is offline Registered
    Join Date
    May 2009
    Posts
    98

    Fanuc A06B spindle drive pinout deffinition for CN1 cable

    Hello,
    I have a couple of these drives I want to use but do not have the deffinition of the pinout abbreviations. I can get the spindle to turn slowly by inputing a 5v dc signal on the srv or sfr terminals but that is all I get. The pin 13 command signal only reads about .6 volts witch makes sense for the slow speed. I am not seeing how to control the spindle speed with a 0 to 10 volt input ? Any help appreciated.
    Thanks,
    Scott
    Reply With Quote Reply With Quote
  2. 12-24-2015, 06:05 PM #2
    Kashif
    Kashif is offline Registered
    Join Date
    Feb 2005
    Posts
    28

    Re: Fanuc A06B spindle drive pinout deffinition for CN1 cable

    spindle drive manual
    Reply With Quote Reply With Quote
  3. 02-08-2017, 07:13 PM #3
    Scott Pancheau
    Scott Pancheau is offline Registered
    Join Date
    May 2009
    Posts
    98

    Re: Fanuc A06B spindle drive pinout deffinition for CN1 cable

    Thank you Kashif for your posting of the manual. I put the project aside when I had not got a response. Was just looking at another post and saw this. Sorry I did not acknowledge this earlier.
    Scott
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Asking for advice Fanuc spindle drive A06B-6052
    By jeck in forum Servo Motors / Drives
    Replies: 1
    Last Post: 05-30-2015, 07:01 AM
  2. Fanuc A06B-6055-H112 spindle unit schematic and CN1 connector pinout???
    By GoldCNC in forum Fanuc
    Replies: 3
    Last Post: 11-04-2014, 06:28 AM
  3. Fanuc A06B-6055-H103 ac spindle Drive manual and or schematics
    By bevins in forum Other Machine Topics
    Replies: 0
    Last Post: 02-12-2014, 07:34 PM
  4. Fanuc A06B-6088-H222 Spindle Drive
    By RLMTS in forum Fanuc
    Replies: 3
    Last Post: 07-27-2011, 09:10 AM
  5. Fanuc A06B 6064 C312 Spindle drive
    By jkford96 in forum Fanuc
    Replies: 5
    Last Post: 02-21-2007, 04:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules