584,871 active members*
5,211 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2007
    Posts
    21

    Exclamation M41 SPINDLE MALFUNCTION 1

    Please help me


    i work with a mazak vtc 20 b and when i try to start spindle it show me a alarm "M41 SPINDLE MALFUNCTION 1 "

    the spindle drive show it "F4 32"


    The machine opening normal and it going to home position normally the problem occurs when i try to start spindle


    if anyone can help me i would appreciate it

  2. #2
    Join Date
    Jul 2007
    Posts
    21

    Re: M41 SPINDLE MALFUNCTION 1

    I found that when I open the machine, the axes go to the home point. So far everything is normal.
    when I turn the spindle by hand on my screen it shows revolutions per 8 for example 8 then 16 then 24 then 32 then 41 then 49 and this continues as I increase the revolutions by hand .
    Maybe this shows you where the problem is ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •