586,022 active members*
3,610 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Deckel, Maho, Aciera, Abene Mills > Maho 800c phillips 432 - B axis feedrate

Thread: Maho 800c phillips 432 - B axis feedrate

Results 1 to 2 of 2
  1. 12-20-2015, 07:06 PM #1
    Uhrenholt
    Uhrenholt is offline Member
    Join Date
    Jun 2015
    Posts
    76

    Maho 800c phillips 432 - B axis feedrate

    Hi

    I'm working on an post processor for this old machine, and I am beginning to make som parts with indexing of the B axis.

    my question is if there are an G code for the rotating speed of the B axis? It is moving rapid now, and I want to slow it down a bit.

    I have looked in the manual, but I can't find anything. Also my German is quite a bit rusty.

    Cheers,

    Daniel
    Reply With Quote Reply With Quote
  2. 12-20-2015, 09:02 PM #2
    Uhrenholt
    Uhrenholt is offline Member
    Join Date
    Jun 2015
    Posts
    76

    Re: Maho 800c phillips 432 - B axis feedrate

    G94 or G95

    What is best?

    I have never worked with this 4 axis thing before. In my work as a toolmaker making progressive stamping tools, I just needed to drill straight holes with 3 axis machine:-)

    Cheers
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. machine constans to Maho 800C
    By errorart in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 2
    Last Post: 01-01-2021, 10:36 AM
  2. MAHO MH 800 C Phillips 432 B axis Post for Mastercam
    By Uhrenholt in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 06-30-2015, 05:00 PM
  3. Maho MH 800C-- Post Processor
    By Mr.Peet in forum Mastercam
    Replies: 2
    Last Post: 04-03-2015, 04:48 AM
  4. Maho 800C, Phillips 532 need constant machine
    By Avalon2002 in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 12-27-2013, 10:16 AM
  5. maho mh 800c maintenance
    By hesamsad in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 06-16-2010, 11:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules