I have a VMC with a Fanuc 0Ma control. Anyway, I was replacing the rubber keypad on the control and when I turned it back on, long story short I lost all my parameters. Anyway, I managed to reinstall the parameters that I saved from when I upgraded the memory with, and I have everything back to where I can jog all axis and home it, start spindle manually, and index the tool holder. But in mdi, I cannot do tool change, start the spindle, or even move axis to commanded position. Anyone know what else I must do?
Thread: Leadwell MCV-0
Results 1 to 4 of 4
-
12-25-2015, 09:57 PM #1
Member
- Join Date
- Mar 2003
- Posts
- 69
Leadwell MCV-0
D. Paulson
-
12-26-2015, 01:00 AM #2
Registered
- Join Date
- Dec 2008
- Posts
- 5
Re: Leadwell MCV-0
->#6089/O9029/M6= ATC prgrm
-
12-26-2015, 02:40 PM #3
Member
- Join Date
- Mar 2003
- Posts
- 69
Re: Leadwell MCV-0
I'm not sure what that's supposed to mean.
D. Paulson
-
01-07-2016, 07:39 PM #4
Member
- Join Date
- Mar 2003
- Posts
- 69
Re: Leadwell MCV-0
I have it figured out. There was more diagnostic parameters to be entered in. More than what I had saved when I did the memory upgrade. Anyway, for those wondering, there is no 9000 macro programs for this machine.
D. Paulson
Reply With QuoteSimilar Threads
-
Leadwell MCV-0P or GMC-350?
By Patrik in forum Uncategorised MetalWorking MachinesReplies: 1Last Post: 11-30-2014, 03:47 PM -
Leadwell MCV-550
By Ergoplus in forum SpanishReplies: 1Last Post: 10-01-2012, 07:38 AM -
Leadwell v-40
By gaza2 in forum Vertical Mill, Lathe Project LogReplies: 0Last Post: 02-12-2011, 03:52 AM -
Leadwell VMC??????
By Fudd in forum Uncategorised MetalWorking MachinesReplies: 6Last Post: 02-14-2007, 03:18 AM
Tags for this Thread
Posting Permissions
