584,866 active members*
5,094 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Help Fanuc OT-A Turret (Baruffaldi RH80) lost
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2016
    Posts
    3

    Help Fanuc OT-A Turret (Baruffaldi RH80) lost

    My lathe lost all its parameters, which have now been re installed but the turret is not recognised. I can home the lathe, jog it in all increments, turn on and off the air chuck and coolant. however the cycle stop remains on all the time and nothing works in mdi auto or program modes although all buttons light up exept cycle start.

    Anyone have any dea why help needed

    Regards Gerry

  2. #2
    Join Date
    Dec 2012
    Posts
    392

    Re: Help Fanuc OT-A Turret (Baruffaldi RH80) lost

    Hi Gerry,

    Look at the Word-attachment, Diagnostic 451.0 and 451.1 is it a 6 or 8 station turret.
    Check also the other Diagn. numbers.

    Check this website for Baruffaldi manuals.
    Baruffaldi Manuals - Danobat-Marathon LLC

    Regards,
    Heavy_Metal.
    The Netherlands.

Similar Threads

  1. hyudai kia turret has lost tool position memory
    By Lhartwig in forum Hyundai Kia
    Replies: 1
    Last Post: 11-29-2013, 10:40 PM
  2. sl30 turret is lost
    By gregoryblaine in forum Uncategorised MetalWorking Machines
    Replies: 10
    Last Post: 09-17-2012, 11:29 PM
  3. Baruffaldi Turret
    By Al_The_Man in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 07-07-2012, 09:17 PM
  4. turret is lost on a daewoo puma 12 lathe
    By tnik in forum Daewoo/Doosan
    Replies: 3
    Last Post: 07-02-2010, 12:34 PM
  5. Fanuc 0M-C ---Parameter lost
    By rajappa in forum Fanuc
    Replies: 3
    Last Post: 06-13-2008, 12:25 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •