Re: v28: how to change 'mill job' name in tree view and set 'program number' in post
I too would like to see the ability to change the milling job name. I have some jobs that require 3 ops. I run the first two ops under the first milling job. But the third op, I have a modified post with stops between several of the features to allow the operator to move the clamps around. I also load save out the stl from the simulation of the first milling job, and load that as my stock for the second milling job.
I also use it on parts where I run the first op with a 3 axis setup, and the rest of the ops are done in 4 axis.
Work: Hurco VMX42/VMX50 - Shopsabre 4896 - Bobcad V4 4axis pro
Home: RF45 with Ajax CNC Controller - Bobcad V27 3 axis pro