I am trying to mill multiple pockets with the same tool. I would like the mill to complete each pocket before moving to the next (as this is much faster due to my slow rapids.)
I have been doing this by creating a separate tool path group for each pocket, and containing it with its associated geometry. This works, but is time consuming to set up when there are many pockets.
Is there a way to make one tool path group with a containment geometry that includes all pockets, but tell MasterCam to finish each pocket before moving to the next?
When I do this Mastercam will only mill one depth layer at a time, jumping from pocket to pocket and completing the each layer for all pockets before moving to the next deeper. This is very time consuming to mill.
Thanks!