Does anyone know what these lines mean? They're where the edge used to be, before the chamfer/fillet. They're not lines indicating the stock material as I haven't set that yet. I assume they're just ghost lines to show me where the material used to be, for what purpose? Is there a way to disable them?
This is in X5.
Thread: Mastercam ghost lines?
Results 1 to 3 of 3
-
01-18-2016, 08:57 PM #1
Registered
- Join Date
- Oct 2012
- Posts
- 18
Mastercam ghost lines?
-
01-19-2016, 07:26 AM #2
Flies Fast
- Join Date
- Dec 2008
- Posts
- 3109
Re: Mastercam ghost lines?
If you created the solid, then these are the contours used to create the solid
( don't delete or modify them, as it would make your solid go "dirty" )
Just place them onto a different level, then turn that level OFF.
-
01-20-2016, 12:52 AM #3
Registered
- Join Date
- Oct 2012
- Posts
- 18
Re: Mastercam ghost lines?
Right on, thanks for the comment. If it doesn't get too chaotic, I'll probably just ignore them.
Reply With QuoteSimilar Threads
-
MasterCam X arc or many lines...?
By skmetal7 in forum MastercamReplies: 5Last Post: 08-26-2014, 08:20 PM -
Skinning and Facet Lines (section lines or what ever you want to call them).
By RAF. in forum BobCad-CamReplies: 9Last Post: 01-11-2014, 11:04 PM -
Engraving Text with Repimeter Lines (Edge Lines)
By tempgp in forum LaserCutReplies: 2Last Post: 08-26-2013, 07:37 AM -
Need Help hooking up Viper200 Stop-Out lines to CNC4PC C1 BOB Input Lines
By CNC-Joe in forum Viper Servo drivesReplies: 1Last Post: 08-11-2010, 01:59 PM -
ghost is here
By nerginer in forum Waterjet General TopicsReplies: 1Last Post: 02-18-2007, 06:19 PM
Tags for this Thread
Posting Permissions
