585,679 active members*
5,108 visitors online*
Register for free
Login

Thread: Fanuc 9M data transfer problem

Results 1 to 2 of 2
  1. 12-30-2006, 05:36 AM #1
    YOO
    YOO is offline Registered
    Join Date
    Dec 2006
    Posts
    10

    Fanuc 9M data transfer problem

    I have YASDA machine with fanuc 9m control system. And when it comes to transfer the NC program through a rs232c cable, NC send only one block and the PC says "transfer finshed" but push the PUNCH key then the machine send one block again. what is the problem?
    when it comes to send PARAMETERS, there is no trouble.
    Reply With Quote Reply With Quote
  2. 01-18-2007, 03:26 PM #2
    YOO
    YOO is offline Registered
    Join Date
    Dec 2006
    Posts
    10

    Smile

    I finaly found out the reson why.
    I have tried to replace from the 1st parameter all day long.
    Switching the param #6.5 to "1" the problem was solved.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules