[naijin]

Hi there, I am thinking of using the usb port on my computer to run my home made cnc router using the UC100, is there anyone out there who is using one? ... are they any good .. has anyone had any problems with the UC100, I would like to hear from anyone with advice or ideas.

Regards
Nick

[paulmacc]

I'm using one with a G540 on a 4x4 plasma table. Works fine for me and alot better than the old printer port. No problems so far. ;-)

[Jon.N.CNC]

See a lot of issues with other motion control boards on here, rarely a uc100 or uc300 with an issue. Got to say something.

[naijin]

Thanks for you replies, I think I am convinced enough to place an order for one, any recommendations as to where one can purchase a UC100?

[A_Camera]

Thanks for you replies, I think I am convinced enough to place an order for one, any recommendations as to where one can purchase a UC100?

I am using the UC300 and I am very happy with it. Works well even under Windows 10.

You can buy their products directly or from the eBay. I bought mine through their web shop.

[jcarpenter2]

Im a new cnc user and I am using the uc100 with the uccnc software and the gecko 540 controller. Also I am using a dell laptop with windows 10. So far ive seen no issues that aren't related to my own errors. Bought my uc100 and uccnc through a guy on here, storm2313.