Hello members,
We have a MAZAK VTC 20B machine. Currently we are facing a problem with this one. It says
Error No: 44 Spindle malfunction 3.
Cause: The spindle (amplifier power-off level) is abnormal
Type of error CServo control mechanism)
Anybody experienced this error before?.
Kindly provide any useful input
regards
Results 1 to 7 of 7
-
01-27-2016, 06:26 PM #1
Junior Member
- Join Date
- Jan 2016
- Posts
- 4
MAZAK VTC VTC 20B Spindle Malfunction
-
01-28-2016, 06:46 AM #2
- Join Date
- Oct 2003
- Posts
- 321
Re: MAZAK VTC VTC 20B Spindle Malfunction
Hi.
What type of Mazatrol
M32 or M-plus
Best regards
Stan
-
01-31-2016, 07:55 PM #3
Junior Member
- Join Date
- Jan 2016
- Posts
- 4
Hello Stan
It is Mazatrol M-Plus machine
regards
GeorgeB
-
02-04-2016, 10:21 AM #4
Junior Member
- Join Date
- Jan 2016
- Posts
- 4
Re: MAZAK VTC VTC 20B Spindle Malfunction
It is Mazatrol M-Plus machine.
Originally Posted by mazak-user
And the error code on the spindle driver seven segment display module is "6C"
-
02-05-2016, 06:19 AM #5
- Join Date
- Oct 2003
- Posts
- 321
MDS Controller must be repaired.
Originally Posted by binugeorgec
-
02-08-2016, 06:11 AM #6
Junior Member
- Join Date
- Jan 2016
- Posts
- 4
Re: MAZAK VTC VTC 20B Spindle Malfunction
Actually I inspected the MDS-B-CV-150 power supply unit. It is not providing the MC output to energize the 3 phase contactor to give input AC power to the power supply unit. I opened the power supply unit, but couldn't find any faulty components. Any idea, why the MC output is not active? Originally Posted by mazak-user
-
07-17-2016, 01:55 PM #7
Registered
- Join Date
- Feb 2016
- Posts
- 15
Re: MAZAK VTC VTC 20B Spindle Malfunction
i sugest check a precharge resistor in drive unit and bypassing resistor
Reply With Quote
Posting Permissions
