[GPCNC]

Hello All ,
I was shadowing this forum from some time and found lots of answers here to fix my maho MH600E2 with Philips CNC432 control. Below is what is curently done and working:
1) Machine constans -> uploaded form copy
2) Reference point search -> working
3) Tool memory-> field with basic tools and corection values
4) ATC working
5) Data In/OUT -> working via RS232and some old PC with TIMCA soft.
6) TEACH IN -> working , wrote some simple program to check if the spindle is running
7) Reset Axis -> working got zero offset set on G52

What is my problem ?
I'm trying to get my program (N100.001) "transfered" form Program memory to AUTO Mode so i can make some machinning , i just can't figure this out
If someone know a keys combination , i would be deeply apriciated if someone would wrote a simple instruction ( ex. preas this and that )
Unfortunatly all my machine documentation got lost during transport from Germany.

BR Paweł

[Uhrenholt]

The program name has to be 9000, 9001, 9002 etc. First two lines:

%PM9000
N9000
N1 G17
N2 G54 T23 M6
.
.
.
Thats how it works for me

Manual, menu and then search:-)


Setting G54 - 59 hit manual and then program memory and menu, press 4 and you can see the coordinates in G52 and then write it in the offset you want:-) took me a year to figure out! If you use anything other than G52, you have to go to teach in and hit G51 to cancel G52... I had to get an German guy to translate some of the papers that went with the machine before I figured it out.

Cheers, Daniel

[GPCNC]

Daniel,
Thank You , I will check this when I'm back from bussines trip , could You please tell me why programs should be N9000 , N9001 etc. I got my machine with a bonus an old PC with Timca soft for program transfer (via RS232) alomg with PC i have a complete archive with programs from company where machine was last used , all of their program have numbers beginign from 1 ex. N1.001 back to N1010.001.

Thanks for help
BR Paweł