Looking for milltrtonics Centurion V post processor for dolphin mill
Looking for milltrtonics Centurion V post processor for dolphin mill
Hello,
Sorry for the delay in replying to this thread.
I have attached a post for this machine - you will need to extract the post from the zip file, then follow these instructions.
IMPORTING POSTS
Having received a new or modified post processor, you will need to import it.
To do this double click the PartMaster Post Processor icon from your desktop, from the top toolbar choose Import
and browse to the folder where the modified post processor was saved.
When the file has been imported you will see the contents in the display area, next choose Compile from the top toolbar to create the .ppx file.
The new post-processor is now ready for use. Close the post-processor by using File > Exit.
When you next run DCAM or DWES the post processor will appear in the drop down list along with all original posts.
ATB
Andre