Can V27 with 3 axis pro create a thread mill program for a
1/8-27 npt internal thread using a thread mill ?
Thanks in advance for any help .
Can V27 with 3 axis pro create a thread mill program for a
1/8-27 npt internal thread using a thread mill ?
Thanks in advance for any help .
Most thread mill manufacturers have an on-line application which will generate code to mill the thread you want, you can then integrate that into your own code,
Regards,
Nick
or 3D engrave,,,you draw your leads and spiral
Why thread mill it ? I would just tap it in the mill
The original question wasn't answered. I need to cut a 6 inch NPT thread external. This is a BOBCAD forum. How would one program with BOBCAD to cut pipe threads?
Searched forum can't find it.
Drew the tapered spiral, can't put the cutter path to it.
http://www.cnczone.com/forums/bobcad...31-bobcad.html
http://www.cnczone.com/forums/bobcad...85-bobcad.html
post back if more help needed
This is an example I did with 1/2" NPT. If its an internal thread you will need your starting major diameter and your ending major and input all of that into a Spiral CAD feature. Then add your lead in and out. Oh, and the 3D Engrave Feature uses the line as the center of tool so make sure you draw your spiral HALF the diam of your tool smaller then actual.