Need Help with G33 for OD Thread on a Siemens 840d controlled lathe

Hi, my name is Brian and I'm a newer CNC Programmer from New Castle, PA

I need to G-Code program OD Thread on a Siemens 840d controlled lathe.
Locknut Thread AN-24 TPI=12 Pitch Dia.=4.6619 OD=4.7160

Siemens Sinumerik Online manual is vague on how to use G33 cycle (so many options, this is a basic OD thread).

I've programmed this on our AB controlled machines using G21 X2.304 Z24.8 E12 (final pass) canned cycle.

Thank You for any suggestions or comments.