MECHANICAL AND ELECTRICAL RETROFITTING ON THE LINK
https://www.facebook.com/media/set/?...0867542&type=3

1. Completely disassembling the machine-tool, retrofitting and repainting the casts and the cover elements
2. Manufacturing new ballscrews
3. Installing NCT 201 control, NCT servo motors and servo drives
4. Original main motor, NCT main drive
5. Cleaning and testing the linear encoders
6. Configuring the NCT 201 case in the place of the previous control
7. Building in an advanced NCT electric switchboard
8. Completely rewiring
9. Launching, measuring, compensation

SPECIAL TASKS:
1. Completely enclosed cover
2. Two work spaces
3. Adapting the hydraulic radial table for both working spaces
4. YHB vapour hood
5. Chip conveyor

NCT Ipari Elektronikai Kft.