[RAYJAY]

hi all just bought a Shoptask 1720 XMTC gold with a quadra lift installed, getting the unit put back together after moving it, need touch up paint, and paint to do the stand the previous owner made, any one have a code or a brand of paint that matches the yellow from Shoptask ? and also the Shopmaster blue

thanks Jeff

[jdclark]

Ray,
You might check with Shoptask-Shopmaster, they used to carry small cans of touch up paint. That would be OK for little chips, but if you need to re-paint large areas you are better off to just get some spray cans and paint the entire machine.

[CAD226B]

hi all just bought a Shoptask 1720 XMTC gold with a quadra lift installed, getting the unit put back together after moving it, need touch up paint, and paint to do the stand the previous owner made, any one have a code or a brand of paint that matches the yellow from Shoptask ? and also the Shopmaster blue

thanks Jeff

don't have any advice on paint, but I have a question about your 1720 XMTC, because I also have one that has Italian MAE steppers , does yours ? If so I would like to get some information.

[RAYJAY]

The stepper motors i have were not installed at all, mine have japan servo co. ltd part number kp86lm2-005 no. 5z 13