All tested and tried.
http://http://www.ebay.com/itm/23185...84.m1555.l2649
All tested and tried.
http://http://www.ebay.com/itm/23185...84.m1555.l2649
Do those motors have 1/2" shafts?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Are the bosses on the front of the motors 50mm? That's what size I need for my planetary gearboxes. The 14mm shaft is also what I need. I need it to fit in one of these:
New in Box Harmonic Drive Systems HPG 20A 21 J6GCK Planetary Gear Reducer | eBay
Also, do they accept step and direction?
Two days earlier I may have bought them for sure, but I bought a new laptop the day before you listed them, and my funds are limited right now.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Bosses appear to be 36mm. Im not sure if these support step/dir since im using global closed loop Linux with my (slow) build. Here's a full manual to flip through if you want to get a better idea of what these are capable of and compatible with. Im sure someone over in the Servo forum has a way to control these via step/dir.
https://industrial.panasonic.com/con.../minas_s_e.pdf
I already looked through the manual yesterday.
The 36mm is a no go for me. Sorry.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)