Let's see pictures of your own steam engines.
Let's see pictures of your own steam engines.
Heres a pic of a simple steam wobbler I made from a casting kit a while back.
Nice work!
--bb99
There are 10 types of people in this world; those that understand binary and those that don't.
Hello
Here is some pictures of my first steam engine. I made it a couple of years ago.
\Jonas
http://www.geocities.com/jcee324
Here's a Vertical 'Upside Down' Engine that I made a couple of years back. No Castings were hurt in the production of this model - everything was made from solid material - no Castings, no CNC, no Mill - just a Lathe, a Drill Press and a lot of hand & File work. I was quite pleased how it turned out, as it was my first Steam Engine.
Skype me on imagineeringnz
----------------------------
Intuitor: (noun)
A person with a passion for learning and innovating that is so strong it is often more powerful than the desire to eat, sleep or seek personal wealth.
Ummm . . . Guilty as charged.
Picture of my fathers 7 1/4" 'H' class 3 cylinder loco. This shot was some time ago, its now nearing completion after 10 years of work.
Sorry , I could not post the picture
if you posted a picture or link it didn't show up.
thanks
Michael T.
"If you don't stand for something, chances are, you'll fall for anything!"
Well I don't understand it.
I hit the browse, and selected a picture.
Waited while it downloaded, and when it was complete, I hit submit.
Never showede up. I did an "edit" and repeated, and it's a no show.
Sorry
Rich
when you upload your picture be sure to read the addition text in the upload section.
This was the mistake I made. It will usually tell you why it didn't upload.
if that dosn't help I am out of suggestions
thanks
Michael T.
"If you don't stand for something, chances are, you'll fall for anything!"
i haven't got into it yet but the guy that helped me and taught me alot of machining when i built my cnc has built alot he does some really cool work ...... heres a few pics of some of his stuff
Mine is packed away but it is an original Creators steam engine that powered the popcorn wagon. At one time someone offered me a $1000 for it but I said no because I had no idea what it is really worth.
If it's not nailed down, it's mine.
If I can pry it loose, it's not nailed down.
I want to see a model steam turbine, anyone built one?
Well i tried to upload again, and I got an error message
that said "invalid file type.
The picture is a jpg.
???
Rich
I will try to take a fresh picture of it and send again.
Could it be that I shrunk it down to 38K for posting ?
Attached, please find images of a P.M. Research re-make, which is 100% CNC machined. With the exception of fasteners, of course.
Nicely designed oscillating engine deanrach. Think it's only do-able on CNC that one!
One question, how do you get the seal between the cylinder and port faces? Usually there's a spring to keep them pressed against each other ..
Nick
Nick,
I had my students reproduce (with permission) the kit version as offered by P.M. Research - see the attached link.
http://www.pmresearchinc.com/store/c...2&cat=4&page=1
If you look at post #1, you'll see it's the same steam engine. The only difference being that my students machined every part from solid stock, no castings and 100% CNC machined.
As for the spring, we used a spring washer - I can get you the part number we used through McMaster Carr.
Thanks for that. It looks much better machined from the solid than from those castings!
Good idea using a spring washer. I have often thought of doing that as there is no need for a long spring, you don't need to vary the spring pressure, just keep it enough to make a good seal.
Nick
Here are some pictures of an Oscillating steam engine or wobbler I made when I was 15 for my GCSE Technology project.
The engine was all made from stock and was my own design. I was very proud at the time, but when I look back on it now, the finish on some of the components wasn't great.
Having said that, it ran brilliantly, partly due to the relatively large bore and stroke and heavy steel flywheel I think. You could just turn it over on lung power.
I sold the engine on ebay, partly because I thought it may fetch more than 20 pounds! But mainly because it was just sat in a box at home and it someone else could give it a better home! I can easily make a better one now if I want.
Nick
"There is no such thing as a gun free zone."
Ray Brandes, Ray-Vin.Com, PCB, FL 32408 USA