Hi guys got this error come up on my cincinatti hawke 150 (output/fuse failure in APC Rack 0) never had this one before checked a few things out but nothing really stands out.
1 checked power coming into machine
2 changed the power supply.
3 changed the hard drive.
4 pulled all the boards nothing seemed fried or damaged and reseated them.
5 checked the fuses on output board and swapped a few around just in case also swapped a few 24volt relays on input board but not all of them.
I am not quite sure what to check next,some say the realtime board has brought up errors like this before, but the machine starts up perfect with no errors on the start up screen all the lights are green on the drives,all lights are green on bridge board no errors,and lights are green drive cards io.If someones can help I need to get the machine going im right in the middle of a job.Cheers.