584,842 active members*
4,098 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2016
    Posts
    2

    INDEX GU 600 Bar puller problem

    Hello and how are you all members who read this

    This is my first Thread.

    So...

    Today i try to setup "bar puller" on my Index GU 600, but there is error

    After all setup for example:

    .
    .
    .
    M5
    G0 X250 Z320
    G94 F0.2
    G0 Z-90
    G1 X30
    M69
    G1 Z80
    M68
    G1 X50
    M30

    This is example, problem is when chuck (jaws) is opened with M69 there is error *3* which means that is error (chuck (jaws) is opened and program cannot continue.

    Any solution?

    Thanks (:

    P.S. Sorry for my bad english

  2. #2
    Join Date
    Mar 2016
    Posts
    2
    Hello,

    i just resolve this problem!

    It was necessary to run program in full automatic mode not single block (block by block)

    Thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •