I have a 2006 Fadal 4020 with legacy MP control. I would like to interface a rotary table with independent controller. I understand I need a PCB-0008 (1050-3) M-Code board, as well as, something else to accept the TB1 and TB2 wires. I'm thinking it is the PCB-0175 board and a ribbon cable. Any help would be appreciated, even if just confirmation that I am on the right track.
Results 1 to 2 of 2
-
03-09-2016, 07:01 PM #1
Registered
- Join Date
- Mar 2016
- Posts
- 1
M-Code Interface requirements for Indexer on 4020
-
03-11-2016, 05:46 PM #2
Registered
- Join Date
- Jan 2015
- Posts
- 417
Re: M-Code Interface requirements for Indexer on 4020
Check this out Flint machine has all the fadal manuals. This is the one you are looking for read pages 339-341. TB1 and TB2 connection page 341. I think your on the right track.
http://www.flintmachine.com/pdfs/fad...al_Devices.pdf
Good Luck... If your Looking for Rotary Heads American Made by the "L" original owner of fadal go here
Index Designs CNC Rotary Table USA California Chatsworth
Reply With QuoteSimilar Threads
-
Haas indexer on Fadal -5 system using a m code.
By Delw in forum FadalReplies: 3Last Post: 12-06-2011, 01:12 AM -
Fanuc OMc M-Code and Indexer
By charger19690 in forum FanucReplies: 0Last Post: 09-25-2011, 03:55 AM -
Adding Hardinge 5c indexer to Excel 10T24 interface
By sneezeguard in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 11-19-2009, 07:17 PM -
FADAL 4020 w/32mp interface USB answer
By Babyhuey in forum FadalReplies: 2Last Post: 08-26-2009, 10:57 PM
Tags for this Thread
Posting Permissions
