[richxantan]

Please help:
Initially, my machine amada vipros 357 cannot punch.
So i change a recondition yuken Servo Valve and a brand new pressure transmitter.
The hudraulic oil i also changed and install with new filter
When I on the machine it give me from PHNC alarm "Norm Press LMT"
Can anyone help me to solve

Thanks

[Pitre]

Please help:
Initially, my machine amada vipros 357 cannot punch.
So i change a recondition yuken Servo Valve and a brand new pressure transmitter.
The hudraulic oil i also changed and install with new filter
When I on the machine it give me from PHNC alarm "Norm Press LMT"
Can anyone help me to solve

Thanks

Hi Richxantan,
Did you check the cooling water temperature ? sometimes the Cooling water temp. causes this alarm.
Secondly did you install the Pressure Transducer correctly ? hope it is not faulty ( though it is new).
did you loose the PHNC parameters by any chance..? if so try restoring the parameters.

please chk n revert.

thanks.

[PHDuc]

hi, did your machine run?

[AMADAJOE]

Please help:
Initially, my machine amada vipros 357 cannot punch.
So i change a recondition yuken Servo Valve and a brand new pressure transmitter.
The hudraulic oil i also changed and install with new filter
When I on the machine it give me from PHNC alarm "Norm Press LMT"
Can anyone help me to solve

Thanks

If your servo valve is faulty. The spool may shift to one side, bleeding all the pressure from the manifold. Your display will read 0. We need more details to help.