584,860 active members*
5,061 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 16M will not complete startup
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2010
    Posts
    4

    Fanuc 16M will not complete startup

    Our Makino GF8 with a 16M (FS16/18) control. It stopped and hung in cycle "Spindle on, Coolant on" when power cycled it on gets as far as "" with a list of Slot 0,2,3 identified. Processor led's all 4 come on then (1=on, 0+off) 1011 with alarm 010. Any ideas.

  2. #2
    Join Date
    Apr 2009
    Posts
    1379

    Re: Fanuc 16M will not complete startup

    Is this you, Brian?

  3. #3
    Join Date
    Jul 2010
    Posts
    4

    Re: Fanuc 16M will not complete startup

    Quote Originally Posted by memoryman View Post
    Is this you, Brian?
    Yes Bill, I have a request in to previous owner for backups.

Similar Threads

  1. Fanuc OM startup and early morning issues
    By metalmover in forum Fanuc
    Replies: 0
    Last Post: 06-15-2013, 02:17 PM
  2. Fanuc 6T startup procedure?
    By laka in forum Fanuc
    Replies: 14
    Last Post: 05-31-2012, 08:31 PM
  3. fanuc ts20 resistor burns at startup
    By joachim in forum Fanuc
    Replies: 2
    Last Post: 10-13-2011, 11:01 PM
  4. fanuc 6m alarm 401 on startup
    By gusf in forum Fanuc
    Replies: 13
    Last Post: 09-12-2011, 03:48 PM
  5. Fanuc 10T startup problem
    By 800XCR in forum Fanuc
    Replies: 2
    Last Post: 10-22-2009, 04:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •