Hello, i have a lot of parts with different lenght. I use a finger-mill (Maxis ) to refresh/correct frontal.
Because of their different lenght, i cant xyxyx them at left, but i must use a "caliper gauge" or "depth gauge" to xyxyx them at right, so to have the same Z in front.
xyxyx - i dont know english word, but i think you get it )) ... i guess is "place/settle/buffer/push", but none sounds good to me
I lose too much time placing the parts.
This is the program :
M110 SB1234 M13 M08
G0 X0 Z2.5
G1 Z-1 F0.12 G95
turret right
turret leaves
I need something like this :
M110 SB1234 M13 M08
G0 X0 Z2.5+10
CALL OZORG
G91 G1 Z-1 F0.12 G95
G90
turret right
turret leaves
.....OZORG
.....G1 Z_left until M axis effort raises
.....RTS
Please, does someone has some magical variables / something to make this work ?
This is an operation from classical sector to numerical, and i must not deliver same parts within a longer duration.
If i cant beat/equal classical time, than there is no use ...
kindly ! pleeeaseee ...