[EsterSpS]

Hello everyone!
I bought a month ago "Biesse rover "336 but the machine turn out broken. The hard drive is broken. Can anybody help me find (buy) software and program for my machine. The machine work whit XNC 1.2 Software and nummber of the machine are 03314. The machine have 4 axis.
I'm Nikola Petrov and who can help me can write me an e-mail: [email protected]
Thanks in advance!

[frank131313]

Hello Nikola have you found XNC 1.2 software ? i have a Biesse Rover 30 L2 1999 ... i run XNC 1.2.0.2 ... i problably have this on the hard disk drive of my machine but i don't know how to make a copy ? If you can explain me how to do it gonna be my pleasure to help you .... do you have the software manual XNC 1.2 from Biesse , me i don't have probably inside they explain how to make a software copy ....

Regards Frank ... if you find the manual send me ... i have the Biesse Rover maintenance manual is this can interest you...

[woody_0]

For the entire Program you only have to make a "clone" of the entire HD
Its only Linux thats all.
But you need a Backup from the Machine to restore the Data.

[9thraven]

Hello, I am in a similar situation. I got my Biesse Rover 336, 1996 Model RT480, delivered last friday and got power to it today.

Zero Manuals and Zero Backup disks, but the machine turns on and does'nt give any errors yet.

First thing I will do is try and make backups of everything.

So I am also busy looking for manuals and software related to these machines.

Any info would be apreciated and I will post what ever I can backup on my machine or find on the WWW

Thanks

Roan

[frank131313]

check in an other tread i have place the XNC manual ... if you dont find PM i'll send you