Why when one works with an enslaved axis that each one has a sensor of home and home is executed from the program, one of the axes always makes two detections and two positionings.
Many Thanks
Carles
Why when one works with an enslaved axis that each one has a sensor of home and home is executed from the program, one of the axes always makes two detections and two positionings.
Many Thanks
Carles
COuld be noise on the home switch. Have you tried increasing the switch debounce setting?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
When you home with a slaved axis be sure that the Home Vel % is the same That will make for an odd home move...