Anyone have a SolidCAM post processor for a Haas SL20 Lathe. I have one that gTurn_Haas_SL20_2X_eval and it doesnt work for some reason. Any help would be greatly appreciated.
Thanks
Anyone have a SolidCAM post processor for a Haas SL20 Lathe. I have one that gTurn_Haas_SL20_2X_eval and it doesnt work for some reason. Any help would be greatly appreciated.
Thanks
Use integrex. Except for some cycles it should work well.
I just tried that and it posted a bunch of stuff.
https://gyazo.com/1eb78a718d3231c55105a2a4b5a8d9ac
Make directory named "indigo" in Your c: drive or change temporary folder address in postprocessor file