Hi guys
as luck would have it the Hdd on our 6000m cnc machine packed up. So I need to reinstall the cnc software but disk 2/2 is corrupt!
where can I get or download disk 1 & 2?
thanks
Anilam
Hi guys
as luck would have it the Hdd on our 6000m cnc machine packed up. So I need to reinstall the cnc software but disk 2/2 is corrupt!
where can I get or download disk 1 & 2?
thanks
Anilam
Do you still need Disk 2? I have all four of the original disks from my machine.
If your still around I could so use those disks.
I need to reload my Falcon 1418 due to a corrupt command.com file but my disk 2 is also corrupt and it doesn't seem to want to read disk 1 either.
[email protected]
Please help
Thank You
Hi guys,
I have bought VMC with Anilam 6000M
System works OK but I have no system or MD backup in case of any system damage.
Could you help me with this control
Is it possible to do any system backup.
Is any battery which must be changed from time to time?
Regards
Krystian
Please contact me if you still have disk software or backup.
[email protected]
Thank's