Dose anybody have this file they can pass on to me. I bought a hand controller and breakout board a while back and now I am ready to use this and do not have the file to add to Mach 3
Thread: ddmmv2.1a.dll
Results 1 to 7 of 7
-
03-28-2016, 02:39 PM #1
Registered
- Join Date
- Jun 2004
- Posts
- 3
ddmmv2.1a.dll
-
08-08-2017, 07:59 PM #2
Registered
- Join Date
- Feb 2016
- Posts
- 50
Re: ddmmv2.1a.dll
If you are still looking for it let me know.
-
07-29-2018, 06:14 PM #3
Registered
- Join Date
- Jun 2012
- Posts
- 3
Re: ddmmv2.1a.dll
Hello quickjam,
I have recently purchased 2 6 axis controllers that seems to need that DLL, but they came without it..... Do yo still have it at hand?? I would be very grateful if you can help me, I have surfed the web trying to find it and was not able to success.
Thanks in advance.
-
07-29-2018, 11:34 PM #4
Registered
- Join Date
- Feb 2016
- Posts
- 50
Yes I can get you the file tonight probably. Yes that is needed.
-
07-30-2018, 04:34 AM #5
Registered
- Join Date
- Feb 2016
- Posts
- 50
Re: ddmmv2.1a.dll
This is what I think you need. Do you have the manual?
-
07-30-2018, 04:56 AM #6
Registered
- Join Date
- Jun 2012
- Posts
- 3
Re: ddmmv2.1a.dll
Thank you! I think I have the correct manual, it is posted in several places around the net..... I will let you know in 2 or 3 days when it is working. Did I thank you already? ;-)
-
04-06-2019, 09:07 AM #7
Member
- Join Date
- Apr 2019
- Posts
- 1
Good day! Help me please, i cant find DDMMV2.1A.dll on the official site, does anybody have it??
Reply With QuoteSimilar Threads
-
DDMMV2.1 Interface Board anyone tried it yet?
By Trainhound in forum CNC Machine Related ElectronicsReplies: 0Last Post: 10-03-2014, 02:23 AM
Tags for this Thread
Posting Permissions
