I've used NC Plot successfully to generate tool paths by converting DXF files to g code. But today I have found a stubborn problem with this feature of the program.
I have a 3 inch circle I'm milling and I have a short lead in and lead out for a good finish. These leads are little arcs about 100 thou long. When NC Plot converts the DXF file to G code it always starts with the circle, then one of the leads, and then the other lead in or out. There must be a way to select the proper order but I can't figure it out. I've read the manual and used trial and error extensively to no avail. Anyone using NC PLot for DXF converting? How do you control the tool path order?