FOR those who want to stay with Mach3 and use teh NEW UC400eth there is SOON to be a new plugin . It will also allow encoder threading and Rigid tapping with Mach3.
https://www.youtube.com/watch?v=25FtHEo4Ujo
(;-) TP
Thread: UC400ETH and Mach3
Results 1 to 4 of 4
-
03-31-2016, 04:10 PM #1
Member
- Join Date
- Oct 2005
- Posts
- 1145
UC400ETH and Mach3
-
04-01-2016, 01:14 PM #2
Member
- Join Date
- Jan 2005
- Posts
- 15362
Re: UC400ETH and Mach3
vmax549
Cool what is the max encoder countMactec54
-
04-01-2016, 02:14 PM #3
Member
- Join Date
- Oct 2005
- Posts
- 1145
Re: UC400ETH and Mach3
All I know for the moment is teh Max sampling rates for teh encoders.
On teh UC100-300 it is 50 Khz
On the UC400 it is 200 Khz
(;-) TP
-
04-08-2016, 05:24 AM #4
Registered
- Join Date
- Sep 2005
- Posts
- 287
Re: UC400ETH and Mach3
Hopefully that will allow using Scanything with the UC400ETH. That way you could have both Mach3 and UCcnc on the same PC and just switch to Mach3 when I want to use Scanything.
Reply With QuoteSimilar Threads
-
To mach3 or not mach3, opinions requested
By KenCameron in forum HURCOReplies: 13Last Post: 10-07-2014, 10:05 PM -
mach3
By viper1753 in forum MilltronicsReplies: 4Last Post: 04-30-2014, 01:58 PM -
Differences Between Mach3 Mill and Mach3 Plasma?
By cjjonesarmory in forum Mach Plasma / LaserReplies: 0Last Post: 11-18-2010, 04:12 PM -
Using Mach3 with Reprap extruderUsing Mach3 with Reprap extruder
By router101 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 3Last Post: 11-03-2010, 10:46 PM -
Mach3
By shogunyabu in forum SpanishReplies: 2Last Post: 04-19-2008, 05:22 PM
Tags for this Thread
Posting Permissions
