I have XR2 Advantage, and am looking to do some raised letters, mirrored and on a curve to make a small stamp. What would be an efficient approach to this? So far my method has been to Chain Text, and then profile machine each letter. This seems very tedious.
Wish I had a solid model of the design and could just z-level the things. But there will be many different designs of these stamps, with 40-50+ letters (font height about 1/4", and ~0.090 z height) on each design.
Scott
Thread: raised letters
Results 1 to 2 of 2
-
01-13-2007, 04:00 PM #1
Registered
- Join Date
- Apr 2005
- Posts
- 345
raised letters
http://www.scpconcepts.com
-
01-13-2007, 06:53 PM #2
Moderator
- Join Date
- Mar 2003
- Posts
- 927
Scott,
You can just create a "boundary" around the letters and use the "pocket" function..(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With Quote
Posting Permissions
